Standard recommended retail price without VAT.
€187.69
Standard recommended retail price without VAT.
Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:
Media Type | 1 Lane of MMF |
---|---|
Compatibility | Multi-Vendor MSA Compatible |
Connectors | LC |
TX Wavelength | 850 nm |
RX Wavelength | 850 nm |
Minimum Optical Budget | 1.9 dB |
Maximum Distance | 100m |
Supported Data Rate | 10.31, 25.78, 53.125 Gbps |
Supported Applications | 10G Ethernet, 25G Ethernet, 50G Ethernet |
DDM/DOM | Supported |
CDR (Clock and Data Recovery) chip | Supported |
Forward Error Correction (FEC) | No |
Transmitter Type | VSCEL Laser |
Tx Wavelength Bandwidth | 20 nm (840-860 nm) |
Average Launch Power (Min) Each Lane | -6 dBm |
Average Launch Power (Max) Each Lane | 4 dBm |
Extinction Ratio (Min) | 3 dB |
Receiver Type | PIN photodiode |
Rx Wavelength Bandwidth | 20 nm (840-860 nm) |
Average Receiver Sensitivity (Min) Each Lane | -7.9 dBm |
Average Receiver Sensitivity (Max) Each Lane | 4 dBm |
Receiver Overload | 5 dBm |
Temperature Range | Standard 0°-70°C |
Storage Temperature | -40° to 85°C |
Relative Humidity | 0 to 85% |
Power Consumption | ≤2W |
Power | +3.3V |
Chipset | Macom, Sumitomo, Samtech, Oclaro, Avago, II-IV |
Compliance | Class 1 FDA, IEC60825-1 Laser Safety Compliant, IEEE802.3cd 50GBASE-SR, RoHS-6, CE, SFP56 MSA, SFP-8472 V12.3, SFP-8431 |
Fortinet compatible FN-TRAN-SFP56-SR SFP56 Module is based on our product 50G-SFP56-100. When You will order it will be encoded to be compatible with Fortinet equipment and it will be labeled with part number: 50G-SFP56-100-FR, where FR means Fortinet Compatible. Above you can download datasheet of our 50G-SFP56-100 product.
FN-TRAN-SFP56-SR is a Fortinet Compatible 50GBASE-SR SFP56 (Small Form Pluggable 56). Transceiver designed for operation over multi-mode optical fiber. Module has a minimum guaranteed optical budget of 1.9 dB, which in most cases is enough to reach 100 m over OM4 multi-mode fiber, or 70 m over OM3 multi-mode fiber. However, distance is just an indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. FN-TRAN-SFP56-SR SFP56 standard uses 50Gb/s VSCEL (Vertical Cavity Surface Emitting Laser) (850 nm) transmitters and 50Gb/s PIN photodiode receiver. Module support DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. FN-TRAN-SFP56-SR operates in standard 0°-70°C temperature range and has an LC connector. 50GBASE-SR SFP56 spec supports up to 53.125 Gbps data rate and such applications as 10G Ethernet, 25G Ethernet, 50G Ethernet (53.125 Gbps). FN-TRAN-SFP56-SR optical transceiver is a multi-purpose module which can be used in various scenarios in today’s networking environment. Most popular applications are Internet Service Provider (ISP), Mobile Operator and Data Center Core Networks to achieve 10Gbps | 25Gbps | 50Gbps links. This transceiver can be inserted in Fortinet switch / router or any other Fortinet equipment which supports this type of transceiver. Fortinet equipment hardware manual contains information if the particular equipment model supports this kind of short range optical transceiver – FN-TRAN-SFP56-SR.
Transceiver is CE/RoHS certified and is compliant with product safety standards. The FN-TRAN-SFP56-SR transceiver is fully compliant to SFP56 spec Multi Source Agreement (MSA), IEEE802.3cd 50GBASE-SR SFP56 standard. Consequently compliance to above standards guarantees that module is compatible and works with majority of networking equipment, where is not implemented special algorithm for protection against third party modules. However – our technical team has accumulated deep expertise in custom-encoded firmware’s for 50GBASE-SR SFP56 transceivers in order to make it work in almost any brand of equipment. We will be glad to know your requirements – Contact Us.