Standard recommended retail price without VAT.
€750.75
Standard recommended retail price without VAT.
Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:
Media Type: | Single-Mode Fiber (SMF) |
---|---|
Connectors: | Single LC |
TX Wavelength: | 1309.14 nm |
RX Wavelength: | 1304.58 nm |
Minimum Optical Budget: | 14.7 dB |
Maximum Distance: | 30km |
Supported Data Rate: | 106.25 Gbps |
Supported Applications: | 100G Ethernet (106.25 Gbps) |
Modulation | PAM4 (Pulse Amplitude Modulation 4-level) |
DDM/DOM: | Supported |
Forward Error Correction (FEC): | Integrated in DSP |
Transmitter Type: | EML TOSA |
Tx Wavelength Bandwidth: | 2.09 nm |
Average Launch Power (Min) Each Lane: | 0 dBm |
Average Launch Power (Max) Each Lane: | 5.6 dBm |
Extinction Ratio (Min): | 5 dB |
Receiver Type: | PIN |
Rx Wavelength Bandwidth: | 2.09 nm |
Average Receiver Sensitivity (Min) Each Lane: | -14.7 dBm |
Average Receiver Sensitivity (Max) Each Lane: | -3.4 dBm |
Receiver Overload: | 2.4 dBm |
Temperature Range: | Standard 0°-70°C |
Storage Temperature: | -5° to 75°C |
Relative Humidity: | 5 to 85% |
Power Consumption: | ≤4.5W |
Power: | +3.3V |
Compliance: | 100G Lambda MSA, CAUI-4, IEEE 802.3cu, RoHS-6, SFF-8636 Rev 2.10a, SFF-8679, CE |
Fujitsu Compatible FIM39740/172 is based on our product BIDI-100G-Q28-SL40B When You will order it will be encoded to be compatible with Fujitsu equipment and it will be labeled with part number: BIDI-100G-Q28-SL40B-MS, where MS means Fujitsu Compatible. Above You can download the datasheet of our BIDI-100G-Q28-SL40B.
Our Compatible Fujitsu FIM39740/172 QSFP28 transceiver is based on our BIDI-100G-Q28-SL40B product, which has the same parameters and is manufactured in accordance with the same industry standards as its OEM counterpart. Our compatible module version is designed for operation over a Single Fiber Single-Mode Fiber (SMF) optical cable. It has a minimum guaranteed optical budget of 14.7 dB, which typically is enough to reach about 40 km. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum (guaranteed) optical budget and the average attenuation of optical cabling in the industry. Our Fujitsu FIM39740/172 compatible transceiver uses a high-quality EML TOSA transmitter operating at 1309.14nm nominal wavelength and a 1304.58nm PIN ROSA receiver. This module supports DDM/DOM optical diagnostics and provides diagnostic data about the current operating conditions. This compatible module has a Single LC connector and module is designed for operation in standard temperature networking environments ranging from 0°-70°C. The transceiver chipset supports data rates ranging from 103.125 Gbps and such applications as 100G Ethernet (103.125 Gbps). It is important to note that the mentioned application support will vary depending on the port where the module will be used, and it supported applications as well as module speed configuration during ordering process, but we can ensure that our module will support at least the same functionality as its OEM counterpart. This is a multi-purpose transceiver that can be used in a variety of different places in today’s networking. As a result, Internet Service Provider (ISP) Aggregation and Backbone, Mobile Operator Core Networks and Data Center Core Network interconnections are the most popular applications for this product.
Our compatible Fujitsu FIM39740/172 module is CE/RoHS certified, it meets product safety standards, and is compliant with QSFP28 Multi Source Agreement (MSA) SFF-8665 industry standard. To ensure smooth operation, we have completed compatibility tests for this module with the most recent platforms of Fujitsu networking equipment, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly in Fujitsu platforms. We are committed to quality, therefore before delivering our products, we conduct stringent quality inspections that include optical parameter measurements, connector cleanliness tests, and EEPROM memory data validation tests. If you have any questions, please Contact us. We will gladly learn about your needs and recommend the best compatible products from our portfolio.