0
  • No products in the cart.
Total:€0.00

25GFH-SFP28-10RX

25GFH-SFP28-10RX

MSA Compatible 25G RX Only eCPRi SFP28 Module

RX Only Single Fiber 25G Fronthaul SFP28 Module (Rx 1310nm, 8.5 – 28.1 Gbps, Max. 10km over SMF, Min AVG Rx Sensitivity: -8.6 dBm, Temp. 0-70C, LC Connector)

€19.98

SKU: 25GFH-SFP28-10RX-MS
5 - Years Warranty
Risk Free Return Policy
Reliable Testing Program
Shipping:Below 1 Week in EU Countries

Similar products:

Key Technical Data
Media Type:

Single-Mode Fiber (SMF)
Connectors:

Single LC
TX Wavelength:

na
RX Wavelength:

1310 nm.
Minimum Optical Budget:

Receiver sensitivity (Min) -13 dBm
Maximum Distance:

10km
Supported Data Rate:

8.5-28.1 Gbps
Supported Applications:

CPRI option 10 (24.33 Gbps), CPRI option 7 (9.830 Gbps), CPRI option 8 (10.138 Gbps), CPRI option 9 (12.165 Gbps)
DDM/DOM:

Supported
Forward Error Correction (FEC):

N/A
Transmitter Type:

N/A
Tx Wavelength Bandwidth:

N/A
Average Launch Power (Min) Each Lane:

N/A
Average Launch Power (Max) Each Lane:

N/A
Extinction Ratio (Min):

N/A
Receiver Type:

PIN photodiode
Rx Wavelength Bandwidth:

40 nm
Average Receiver Sensitivity (Min) Each Lane:

-13 dBm
Average Receiver Sensitivity (Max) Each Lane:

2 dBm
Receiver Overload:

3 dBm
Temperature Range:

Standard 0°-70°C
Storage Temperature:

-40° to 85°C
Relative Humidity:

5 to 85%
Power Consumption:

≤1.2W
Power:

+3.3V single power supply
Compliance:

IEEE 802.3cc, SFF-8432, 25GBASE-LR, CE, RoHS, SFF-8431, SFF-8472, SFP28 MSA
Product Documentation

25GFH-SFP28-10RX is a 25GE LR RX Only eCPRI (enhanced CPRI) / CPRI Fronthaul Multi-Vendor MSA Compatible SFP28 (Small Form-Factor Pluggable 28) Transceiver. As global online traffic is asymmetrical – especially this statement is valid nowadays when biggest share of global traffic is video streaming, there is much more downlink traffic then uplink. To address this challenge and help engineers design networks more cost efficiently 25GE LR eCPRI RX Only comes in play. 25GE LR eCPRI RX Only doesn’t have Transmitter, it only has PIN photodiode receiver comparing to classical 25GE LR module which has both components. 25GE LR eCPRI RX Only operates over Single Fiber Single-Mode Fiber (SMF) optical cable. Module has guaranteed average receiver sensitivity (Min) -8.6 dBm, which in most cases is enough to reach 10 km over OS2 fiber. 25GFH-SFP28-10RX 25GE LR RX Only eCPRI / CPRI supports DDM/DOM optical diagnostics that provide real-time diagnostic information about the present operating conditions. 25GFH-SFP28-10RX operates in Standard 0°-70°C temperature range and has Single LC interface. 25GFH-SFP28-10RX 25GE LR RX Only eCPRI / CPRI SFP28 support 8.5-28.1 Gbps data rate and eCPRI / CPRI Option 10 (24.33 Gbps), CPRI Option 9 (12.165 Gbps), CPRI Option 8 (10.138 Gbps), CPRI option 7 (9.830 Gbps) applications. 25GFH-SFP28-10RX SFP28 Single Fiber optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular use cases are in Mobile Carrier Networks, thus 5G fronthaul and O-RAN (open radio access network) applications to address traffic asymmetry challenge, and as well can be used in networking scenarios where Deep Packet Inspection (DPI) is performed.
25GFH-SFP28-10RX 25GE LR RX Only eCPRI / CPRI SFP28 transceiver is CE/RoHS certified and is compliant with product safety standards. 25GFH-SFP28-10RX is fully compliant to SFF-8431 and SFF-8472 Multi Source Agreement (MSA), eCPRI, CPRI and IEEE 802.3by 25 Gb/s specification. Consequently, compliance to above standards guarantees that module is compatible and works with majority of networking equipment, where is not implemented special algorithm for protection against third party modules. However – our technical team has accumulated deep expertise in custom-encoded firmware’s for 25GE LR RX Only eCPRI / CPRI SFP28 transceiver in order to make it work in almost any brand equipment. We will be glad to know your requirements.

Related Products