R9J29A

R9J29A HPE compatible X1E0 400G QSFP-DD SR8 Transceiver

# Key Highlights
  • Type: 400GBASE-SR8 QSFP-DD
  • Compatibility: HPE Compatible
  • Tx/Rx Wavelength: 850nm
  • Laser: VSCEL
  • Modulation: PAM4
  • Fiber Type: Multi-Mode Fiber (MMF)
  • Connectors: MTP/MPO-16
  • Optical Budget: 1.9dB
  • Max. Distance: 100m over OM5
  • Data Rate: 425 Gbps
  • FEC Forward Error Correction: Supported
  • DDM/DOM: Supported
  • Power Consumption: 10W
  • Temperature: Standard 0a° – 70a°C
# Pricing & Ordering
SKU: 400G-QSFP-DD-100-HP

167.58

Standard recommended retail price without VAT.

Lead Time: Below 1 Week in EU Countries
# Quality Assurance

Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:

# Key Technical Data
Media Type:

Multi-Mode Fiber (MMF)

Connectors:

MTP/MPO

TX Wavelength:

850 nm.

RX Wavelength:

850 nm.

Minimum Optical Budget:

1.9 dB

Maximum Distance:

100m

Supported Data Rate:

425 Gbps

Supported Applications:

400G Ethernet (412.5Gbps)

DDM/DOM:

Supported

CDR (Clock and Data Recovery) chip

Supported

Forward Error Correction (FEC):

Host FEC Supported

Transmitter Type:

VSCEL Laser

Tx Wavelength Bandwidth:

20 nm (840-860 nm)

Average Launch Power (Min) Each Lane:

-6 dBm

Average Launch Power (Max) Each Lane:

4 dBm

Extinction Ratio (Min):

3 dB

Receiver Type:

PIN photodiode

Rx Wavelength Bandwidth:

20 nm (840-860 nm)

Average Receiver Sensitivity (Min) Each Lane:

-7.9 dBm

Average Receiver Sensitivity (Max) Each Lane:

4 dBm

Receiver Overload:

5 dBm

Temperature Range:

Standard 0°-70°C

Storage Temperature:

-40° to 85°C

Relative Humidity:

0 to 85%

Power Consumption:

≤12W

Power:

+3.3V

Chipset:

Inphi

Compliance:

400GBASE-SR8, IEC60825-1 Laser Safety Compliant, IEEE 802.3bs, QSFP-DD MSA, RoHS-6, CE

# Product Documentation
Multi-Vendor MSA Compatible 400G-QSFP-DD-100 Datasheet

HPE Compatible R9J29A Module is based on our product 400G-QSFP-DD-100. When You will order it will be encoded to be compatible with HPE equipment and it will be labeled with part number: 400G-QSFP-DD-100-HP, where HP means HPE Compatible. Above You can download data-sheet of our 400G-QSFP-DD-100 product.

# Product Description

Our Compatible HPE R9J29A QSFP-DD transceiver is based on our 400G-QSFP-DD-100 product, which has the same parameters and is manufactured in accordance with the same industry standards as its OEM counterpart. Our HPE compatible X1E0 400G QSFP-DD SR8 MM850 100m OM4 MPO16/APC Transceiver version is designed for operation over a Double Fiber Multi-Mode Fiber (MMF) optical cable. It has a minimum guaranteed optical budget of 1.9 dB, which typically is enough to reach about 100m over OM5. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum (guaranteed) optical budget and the average attenuation of optical cabling in the industry. Our HPE R9J29A compatible transceiver uses a high-quality VSCEL Laser transmitter operating at 850 nm nominal wavelength and a 850 nm PIN Photodiode receiver. This module supports DDM/DOM optical diagnostics and provides diagnostic data about the current operating conditions. This compatible module has a MTP/MPO-16 connector and module is designed for operation in standard temperature networking environments ranging from 0°-70°C. The transceiver chipset supports data rates ranging from 425 Gbps and such applications as 400G Ethernet (412.5Gbps). It is important to note that the mentioned application support will vary depending on the port where the module will be used, and it supported applications as well as module speed configuration during ordering process, but we can ensure that our module will support at least the same functionality as its OEM counterpart. This is a multi-purpose transceiver that can be used in a variety of different places in today’s networking. As a result, Internet Service Provider (ISP) Aggregation and Backbone, Mobile Operator Core Networks and Data Center Core Network interconnections are the most popular applications for this product.

Our compatible HPE R9J29A X1E0 400G QSFP-DD SR8 MM850 100m OM4 MPO16/APC Transceiver is CE/RoHS certified, it meets product safety standards, and is compliant with QSFP-DD Multi Source Agreement (MSA) QSFP-DD MSA industry standard. To ensure smooth operation, we have completed compatibility tests for this module with the most recent platforms of HPE networking equipment, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly in HPE platforms. We are committed to quality, therefore before delivering our products, we conduct stringent quality inspections that include optical parameter measurements, connector cleanliness tests, and EEPROM memory data validation tests. If you have any questions, please Contact us. We will gladly learn about your needs and recommend the best compatible products from our portfolio.