XQ+DA0003

MikroTik Compatible QSFP28-to-QSFP28 100G Passive Twinax Cable

# Key Highlights
  • Type: 100G Passive Twinax Cable
  • Compatibility: MikroTik Compatible
  • Media Type: Passive Copper Cable
  • Max. Distance: 3 m
  • Data Rate: 96.97-112.2 Gbps
  • Temperature: Standard 0°-70°C
  • Low Power Consumption: 1.5W (Typical)
# Pricing & Ordering
SKU: 100G-PDAC-QSFP-3-MT

33.37

Standard recommended retail price without VAT.

Lead Time: Below 1 Week in EU Countries
# Quality Assurance

Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:

# Key Technical Data
Media Type:

Twinax Cable

DAC Copper Type:

AWG28

Maximum Distance:

3m

Supported Data Rate:

96.97-112.2 Gbps

Supported Applications:

100G Ethernet (103.125Gbps)

DDM/DOM:

Supported

Temperature Range:

Standard 0°-70°C

Connectors:

QSFP

Power:

+3.3V single power supply

Power Consumption:

1.5W

MTBF:

1 000 000 Hours

Compliance:

CE, IEEE 802.3ba, QDR InfiniBand, QSFP28 MSA, RoHS, SFF-8436, SFF-8665

# Product Documentation
Multi-Vendor MSA Compatible 100G Passive Twinax Cable 100G-PDAC-QSFP Datasheet

MikroTik Compatible XQ+DA0003 cable is based on our product 100G-PDAC-QSFP. When You will order it will be encoded with MikroTik code and it will be labeled with part number: 100G-PDAC-QSFP-3-MT, where MT means MikroTik Compatible. Above You can download datasheet of our 100G-PDAC-QSFP product.

# Product Description

          XQ+DA0003 is MikroTik Compatible 100G Passive Twinax Cable, operating over passive copper cable. 100G Passive twinax cable is equipped with MikroTik compatible QSFP28 transceiver assembly at the each end of cable. As the passive Twinax cables do not support any electrical transmission signal boosting or regeneration, length of this 100G Passive Twinax cable is 3 meter, which is enough to support 100G connections within same or neighboring equipment racks. 100G Passive Twinax cable supports 4 separate fully duplex copper data lanes, which support 96.97-112.2 Gbps multi-rate communication and such applications as 100G Ethernet (100.125Gbps). Most popular applications of XQ+DA0003 100G Passive Twinax Cables are cost effective close range interconnections within equipment room of telecom operators or data centers, interconnecting LAN or SAN applications with speeds up to 100G. Switch high speed stacking is as well one of the application examples for this 100G cable. The MikroTik XQ+DA0003 passive twinax cable is compatible with the MikroTik CCR2216 and CRS504 and other switches.

          XQ+DA0003 Passive Twinax Cable is CE/RoHS certified and it is fully compliant with the product safety standards. XQ+DA0003 is as well fully compliant to QSFP28 Multi Source Agreement SFF-8665. We at Edge Optics run compatibility tests on the MikroTik compatible XQ+DA0003 passive twinax cables using the newest MikroTik networking platforms, allowing us to encode the transceiver’s EEPROM memory to be fully compatible and work seamlessly with MikroTik system equipment. XQ+DA0003 passive twinax cables, on the other hand, comply with the Multi Source Agreement and the SFF-8665 industry standard. Because our priority is to provide excellent service, we do thorough quality inspections on all of our products before to delivery. As a result, we perform optical parameter measurements, connector cleanness testing, and EEPROM memory data validation tests on QSFP transceivers. Please contact us so that we can learn more about your requirements.