MSA compatible 10G SFP+ DWDM 100km Module

# Key Highlights
  • Type: SFP+
  • Compatibility: MSA compatible
  • Tx/Rx Wavelength: ITU 100Ghz Grid: C-Band/ Ch. 17 – 61
  • Media Type: Single-Mode Fiber (SMF)
  • Optical Budget: 26 dB
  • Max. Distance: 100 km
  • Dispersion Tolerance: 2000 ps/nm
  • Data Rate: 9.95-11.32 Gbps
  • Temperature: Standard 0°-70°C
# Pricing & Ordering


Standard recommended retail price without VAT.

Lead Time: Below 1 Week in EU Countries
# Quality Assurance

Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:

# Key Technical Data
Media Type:

TX Wavelength:

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

RX Wavelength:

Minimum Optical Budget:

Maximum Distance:

Supported Data Rate:

Supported Applications:

, , , , , , , , , ,


Temperature Range:


Tx Wavelength Bandwidth:

Rx Wavelength Bandwidth:

Minimum Transmitting Power:

Maximum Transmitting Power:

Receiver Sensitivity:

Receiver Overload:


Transmitter Type:

Receiver Type:



, ,


, , , , , ,

# Product Documentation
# Product Description

    The 10G SFP+ DWDM 100km is a Multi-Vendor MSA Compatible SFP+ (Small Form Factor Pluggable) Transceiver that operates over a Double Fiber DWDM Single-Mode Fiber (SMF) optical cable. 10G DWDM SFP+ 100km has a minimum guaranteed optical budget of 26 dB, which is usually enough to reach a distance of about 100 km. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum optical budget and the average attenuation of optical cabling in industry. DWDM-10G-SFP-100 employs a high-quality EML Laser transmitter operating at nominal wavelengths according to ITU-T DWDM 100 Ghz Grid channels from 17 to 61 (1563.86 nm to 1528.77 nm), as well as an ITU-T DWDM Grid 100 GHz C-Band APD Photodiode receiver. SFP 10G DWDM 100km has a dispersion tolerance of 2000 ps/nm.

   DDM/DOM optical diagnostics are supported by 10g SFP+ DWDM 100km which provides diagnostic information about the current operating conditions. The DWDM-10G-SFP-100 has a Double LC interface and operates in the standard 0°-70°C temperature range. DWDM-10G-SFP-100 data rates ranging from 9.95 to 11.32Gbps and applications such as 10G Ethernet (10.31Gbps), STM-64 (9.95Gbps), ODU2 (10.037Gbps), ODU2e (10.399Gbps), OTU2 (10.70Gbps), OTU1f (11.27Gbps), OTU2f (11.32Gbps), OTU1e (11.049Gbps), OTU2e (11.095Gps). DWDM-10G-SFP-100 Double Fiber optical transceiver is a multi-purpose module that is used in a variety of networking applications today. As a result, Internet Service Provider (ISP) Fiber To The Home aggregation and backbone, Mobile operator core and backhaul SDH/SONET applications, Data Center networking site interconnections, and other optical links are the most popular applications.

   DWDM-10G-SFP-100 is CE/RoHS certified and fulfills product safety standards. SFP 10G DWDM 100km Transceiver complies with the SFP+ Multi Source Agreement SFF-8419 and IEEE 802.3ae 10GBASE-ZR. As a result, C Band DWDM SFP 10G 100km compatible with 80% of networking equipment where no special algorithm for protection against third-party modules is implemented. However, we can provide an SFP+ transceiver with custom-encoded firmware that will work in almost any equipment.
Because we are committed to providing high-quality service, we conduct rigorous quality checks before delivering our products. As a result, we perform optical parameter measurements, connector cleanness tests, and EEPROM memory data validation tests on SFP+ transceivers. Please contact us if you require any additional information.