CFP2-WDM-DET-1HL Cisco Compatible 200G 1000KM SMF CFP2 module

# Key Highlights
  • Type: Cisco CFP2 DCO
  • Compatibility: Cisco Compatible
  • Tx/Rx Wavelength: 96 Channel Tunable ITU-T 50Ghz C-Band
  • Laser: Tunable DWDM Coherent
  • Modulation: DQPSK/QPSK (100G), 16QAM (200G)
  • Fiber Type: Single-Mode Fiber (SMF)
  • Connectors: Double LC
  • Optical Budget: 18.5dB
  • Max. Distance: 2000km (100G), 1000km (200G) with EDFA
  • Data Rate: 103.125 to 210.4 Gbps
  • DDM/DOM: Supported
  • FEC Forward Error Correction: SD-FEC 25%
  • Test Function: Line & Client PRBS Generator and Checker
  • Compliance: OIF-CFP2-DCO, CFP2 MSA Hardware Specification 1.0
  • Power Consumption: ≤ 21W (100G) / 26W (200G)
  • Temperature: Standard -5° to 70°C
# Pricing & Ordering


Standard recommended retail price without VAT.

Lead Time: Below 1 Week in EU Countries
# Quality Assurance

Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:

# Key Technical Data
Media Type:


Supported Data Rate:

Supported Applications:

, , ,




Test Function:

Forward Error Correction (FEC):

Minimum Optical Budget:

Maximum Distance:

Transmitter Type:

TX Wavelength:

Tx Wavelength Bandwidth:

Receiver Type:

RX Wavelength:

Rx Wavelength Bandwidth:

Average Launch Power (Min) Each Lane:

Average Launch Power (Max) Each Lane:

Optimum Input Power (Min):

Optimum Input Power (Max):

Extended Input Power (Min):

Extended Input Power (Max):

Receiver Overload:

Temperature Range:

Storage Temperature:

Relative Humidity:

Power Consumption:



, , , , , , ,

# Product Documentation
Cisco Compatible CFP2-WDM-DET-1HL CFP2 DCO Datasheet - 200G-CFP2-DCO

Our version of Cisco Compatible CFP2 DCO Datasheet is based on our product 200G-CFP2-DCO. When You will order it will be encoded to be compatible with Cisco equipment and it will be labeled with part number: 200G-CFP2-DCO-CI, where CI means Cisco Compatible. Above You can download datasheet of our 2x100G-QDD-10 product.

# Product Description

CFP2-WDM-DET-1HL is Cisco compatible dual rate (100G/200G) Coherent CFP2 (C (centum) Form Factor Pluggable 2) Transceiver designed for operation over Double Fiber optical cable. On the transmission side, the module converts 25.78Gbps (CAUI-4) or 27.95Gbps (OTL4.4) electrical input channels into one Single Lambda 100G/200G optical signal. Reversely the opposite is done on the receiving side, the module converts one Single Lambda 100G/200G optical signal into 25.78Gbps (CAUI-4) or 27.95Gbps (OTL4.4) electrical input signal. CFP2-WDM-DET-1HL has a minimum guaranteed optical budget of 18.5 dB, which in most cases is enough to reach 80km without signal amplification, however the module can reach up to 2000km (100G) or 1000km (200G) with signal amplification. Distance is just an indicative parameter for comfort of identification that is calculated by taking into account minimal optical budget and average attenuation of optical cabling in industry. To achieve high data rate, long haul error-free transmission Soft Decision FEC (Forward Error Correction) with 25% overhead has been implemented on this unit. Cisco compatible CFP2-WDM-DET-1HL has advanced DSP (Digital Signal Processor) ASIC and integrated Coherent Transmitter/Receiver which helps to revolutionize the IP routing edge giving it ability to transport IP over DWDM Network (IPoDWDM). Cisco CFP2 DCO Compatible module Transmitter and Receivers support PM-DQPSK (polarization-multiplexed differential quadrature phase shift keying) / PM-QPSK (polarization-multiplexed quadrature phase shift keying) modulation for 100G and PM-16QAM (Polarization multiplexed 16-ary quadrature amplitude modulation) for 200G.

Cisco compatible CFP2-WDM-DET-1HL uses tunable DWDM Coherent laser transmitter (ITU-T 50Ghz C-Band 96 Channels) and tunable DWDM Coherent (ITU-T 50Ghz C-Band 96 Channels) receiver. Cisco CFP2 DCO supports DDM/DOM optical diagnostics that provide real-time diagnostic information about the present operating conditions and additionally the module has built-in Line & Client PRBS (pseudorandom binary sequence) generator and checker which can help to diagnose and test the link state. 200G CFP2-DCO operates in Standard -5° to 70°C temperature range and has Double LC connector facing Line side and 104-pin CFP2 MSA-compliant connector towards Host side. Cisco compatible CFP2-WDM-DET-1HL supports 112.2 to 210.4 Gbps data rate and is designed for Telecom Metro/Long-haul, Wireless Backhaul and Hyperscale Data Center Interconnect (DCI) applications.

To ensure compatibility we have tested our compatible version of Cisco CFP2-WDM-DET-1HL Transceiver in latest platforms of Cisco networking equipment, which allows us to encode transceiver EEPROM memory to be compatible and work seamlessly with Cisco platforms. Transceivers is also CE/RoHS certified, compliant with product safety standards and to CFP2 MSA Hardware Specification 1.0 with modifications, CFP MSA Management Interface Specification 2.6 r06a with modifications, OIF-CFP2-DCO, CEI-28G-MR specifications and OTL4.4/OTLC2 Signaling. We will be glad to know your requirements – Contact Us.