Standard recommended retail price without VAT.
€16.07
Standard recommended retail price without VAT.
Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:
Media Type: | Single-Mode Fiber (SMF) |
---|---|
TX Wavelength: | 1330 nm. |
RX Wavelength: | 1270 nm. |
Minimum Optical Budget: | 9 dB |
Maximum Distance: | 20km |
Supported Data Rate: | 1.25-10.31 Gbps |
Supported Applications: | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps), STM-64 (9.95Gbps) |
DDM/DOM: | Support |
Temperature Range: | Standard 0°-70°C |
Connectors: | Single LC |
Tx Wavelength Bandwidth: | 40 nm (1310-1350 nm) |
Rx Wavelength Bandwidth: | 40 nm (1250-1290 nm) |
Minimum Transmitting Power: | -5 dB |
Maximum Transmitting Power: | 1 dB |
Receiver Sensitivity: | -14 dBm |
Receiver Overload: | 0.5 dBm |
Dispersion: | 140-160 ps/nm |
Transmitter Type: | DFB Laser |
Receiver Type: | PIN photodiode |
Power: | +3.3V single power supply |
Chipset: | MAXIM, MINDSPEED, SEMTECH |
Compliance: | CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, RoHS, SFF-8431, SFP MSA |
Transceiver Type: | SFP+ |
Extreme Networks Compatible 10GB-BX10-D SFP+ Module is based on our product BIDI-10G-SFP-20B. When You will order it will be encoded to be compatible with Extreme Networks equipment and it will be labeled with part number: BIDI-10G-SFP-20B-EX, where EX means Extreme Networks Compatible. Above You can download datasheet of our BIDI-10G-SFP-20B product.
The Extreme Networks 10GB-BX10-D compatible module is intended for use with Single Single-Mode Fiber (SMF) optical cable. It has a minimum guaranteed optical budget of 6.2 dB, which is usually enough to reach up to 10 km distance as per 10GB-BX10-D datasheet specification. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum optical budget and the average attenuation of optical cabling in industry. Our compatible module version uses a high-quality DFB Laser transmitter with operating at nominal wavelength 1330 nm. and 1270 nm. PIN Photodiode receiver. DDM/DOM optical diagnostics are supported by this module, which provides diagnostic information about the current operating conditions. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The Extreme Networks 10GB-BX10-D compatible module has a Single LC interface and operates in the Standard 0°-70°C temperature range. This SFP+ module supports data rates ranging from 1.25 to 10.31 Gbps and applications such as 10G Ethernet (10.31 Gbps), Gigabit Ethernet (1.25 Gbps), and STM-64 (9.95 Gbps). Our Extreme Networks 10GB-BX10-D module is a multi-purpose module that can be used in a variety of networking applications. Consequently, most popular applications are Internet Service Provider, Fiber to The Home routing and switching equipment with compatible interfaces, Mobile Operator Core and Backhaul applications, Data Center networking for Ethernet connections and other optical fiber links. Our Extreme Networks 10GB-BX10-D compatible transceiver has proven to be reliable in temperature-controlled server rooms over a long period of time. Extreme Networks 10GB-BX10-D Datasheet compatible transceivers do not require any maintenance while in use. The only possible maintenance requirement could occur during cable replacement, when the transceiver connector must be thoroughly cleaned of dust using special optical connector cleaning tools. Therefore, ensuring the best connection possible – leading to best performance!
Our Compatible Extreme Networks 10GB-BX10-D Datasheet and Price are based on our product BIDI-10G-SFP-10BI, which is CE/RoHS certified and fulfills product safety standards. We perform compatibility tests for compatible Module with the most recent Extreme Networks networking equipment platforms, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly with Extreme Networks platforms. Furthermore, our optical transceivers comply with the SFP+ Multi Source Agreement industry standard SFF-8431. Because we are committed to providing high-quality service, we conduct rigorous quality checks before delivering our products. As a result, we perform optical parameter measurements, connector cleanness tests, and EEPROM memory data validation tests on SFP+ transceivers. Please contact us if you require any additional information Contact Us!