100G-QSFP28-SL2

MSA Compatible 100G-FR Single Lambda PAM4 QSFP28 Module: 100G-QSFP28-SL2

# Key Highlights
  • Type:100G-FR Single Lambda PAM4 QSFP28
  • Compatibility:Multi-Vendor MSA Compatible
  • Tx/Rx Wavelength:1304.5- 1317.5 nm
  • Laser:EML TOSA
  • Fiber Type:Single-Mode Fiber (SMF)
  • Connectors:Double LC
  • Optical Budget:4 dB
  • Max. Distance:2km
  • Optical Data Rate / Baud Rate:53.125 Gbps
  • Modulation format:PAM4
  • Data Rate:106.25 Gbps
  • FEC Forward Error Correction:Supported
  • DDM/DOM:Supported
  • Power Consumption:≤4.5W
  • Temperature:Standard 0°-70°C
# Pricing & Ordering
SKU: 100G-QSFP28-SL2

297.30

Standard recommended retail price without VAT.

Lead Time: Below 1 Week in EU Countries
# Quality Assurance

Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:

# Key Technical Data
Media Type:

Connectors:

TX Wavelength:

RX Wavelength:

Minimum Optical Budget:

Maximum Distance:

Supported Data Rate:

Supported Applications:

DDM/DOM:

CDR (Clock and Data Recovery) chip

Forward Error Correction (FEC):

Transmitter Type:

Tx Wavelength Bandwidth:

Average Launch Power (Min) Each Lane:

Average Launch Power (Max) Each Lane:

Extinction Ratio (Min):

Receiver Type:

Rx Wavelength Bandwidth:

Average Receiver Sensitivity (Min) Each Lane:

Average Receiver Sensitivity (Max) Each Lane:

Receiver Overload:

Temperature Range:

Storage Temperature:

Relative Humidity:

Power Consumption:

Power:

Chipset:

Compliance:

, , , , , , ,

# Product Documentation
# Product Description

100G-QSFP28-SL2 is Multi-Vendor MSA Compatible 100G-FR Single Lambda PAM4 QSFP28 (Quad Small Form-Factor Pluggable 28) Transceiver, operating over pair of single-mode optical fiber. On the transmission side module converts 4x 25G NRZ (Non-return-to-zero) electrical input channels (each 25.78125Gbps) into 1 Single Lambda 100G PAM4 optical signal using PAM4 modulation with baud rate of 53.125 Gbps. Reversely the opposite is done on the receiving side, module converts 1 Single Lambda 100G PAM4 optical signal into 4x 25G NRZ (Non-return-to-zero) electrical inputs using PAM4 modulation with baud rate of 53.125 Gbps. Module has minimum guaranteed optical budget of 4 dB, which in most cases is enough to reach 2 km distance using single-mode cable. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. 100G-QSFP28-SL2 uses EML TOSA (which operates over 1304.5- 1317.5 nm range) laser transmitters and PIN ROSA receivers. Module support DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. Additionally module supports FEC (Forward Error Correction) function which will help receiving side detect and correct bit errors and improve the overall quality of the link. 100G-QSFP28-SL2 operates in Standard 0°-70°C temperature range and has double LC connectors. 100G-FR Single Lambda PAM4 QSFP28 support up to 106.25 Gbps data rate and such applications as 100G Ethernet (103.125 Gbps). 100G-QSFP28-SL2 optical transceiver is multi-purpose module used in number of different places in today’s networking environment. Most popular applications are Internet Service Provider (ISP), Mobile Operator and Data Center Core Networks.

Transceiver is CE/RoHS certified and it is Compliant with product safety standards. 100G-QSFP28-SL2 Transceiver is fully compliant to QSFP28 Multi Source Agreement (MSA) and 100G Lambda MSA. Consequently compliance to above standards guarantees that module is compatible and works with majority of networking equipment, where is not implemented special algorithm for protection against third party modules. However – our technical team has accumulated deep expertise in custom-encoded firmware’s for 100G-FR Single Lambda PAM4 QSFP28 transceiver in order to make it work in almost any brand equipment. We will be glad to know your requirements.

preloader