AFBR-89CTDZ

AFBR-89CTDZ Avago Compatible 100G QSFP28 100M Transceiver

# Key Highlights
  • Type:100GBASE-SR4 QSFP28
  • Compatibility:Avago Compatible
  • Tx/Rx Wavelength:850nm
  • Laser:VSCEL
  • Fiber Type:Multi-Mode Fiber (MMF)
  • Connectors:MTP/MPO
  • Optical Budget:1.9 dB
  • Max. Distance:100 m (OM4) / 70 m (OM3)
  • Data Rate:103.125 Gbps
  • FEC Forward Error Correction:N/A
  • DDM/DOM:Supported
  • Power Consumption:≤3.5W
  • Temperature:Standard 0°-70°C
# Pricing & Ordering
SKU: 100G-QSFP28-100-AG

34.75

Standard recommended retail price without VAT.

Lead Time: Below 1 Week in EU Countries
# Quality Assurance

Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:

# Key Technical Data
Media Type:

4 Lanes of MMF

Connectors:

MTP/MPO

TX Wavelength:

850 nm.

RX Wavelength:

850 nm.

Minimum Optical Budget:

1.9 dB

Maximum Distance:

100m

Supported Data Rate:

103.125 Gbps

Supported Applications:

100G Ethernet (103.125Gbps)

DDM/DOM:

Supported

CDR (Clock and Data Recovery) chip

Supported

Forward Error Correction (FEC):

Not Supported

Transmitter Type:

VSCEL Laser

Minimum Transmitting Power:

Each Lane -8.4 dBm

Tx Wavelength Bandwidth:

20 nm (840-860 nm)

Maximum Transmitting Power:

Each Lane 2.4 dBm

Average Launch Power (Min) Each Lane:

-8.4 dBm

Average Launch Power (Max) Each Lane:

2.4 dBm

Receiver Sensitivity:

Each Lane -10.3 dBm

Extinction Ratio (Min):

3 dB

Receiver Type:

PIN photodiode

Rx Wavelength Bandwidth:

20 nm (840-860 nm)

Average Receiver Sensitivity (Min) Each Lane:

-10.3 dBm

Average Receiver Sensitivity (Max) Each Lane:

2.4 dBm

Receiver Overload:

3.4 dBm

Temperature Range:

Standard 0°-70°C

Storage Temperature:

-40° to 85°C

Relative Humidity:

0 to 85%

Power Consumption:

≤3.5W

Power:

+3.3V

Chipset:

Macom, Sumitomo, Samtech, Oclaro, Avago, II-IV

Compliance:

Class 1 FDA, IEC60825-1 Laser Safety Compliant, IEEE 802.3bm, RoHS-6, 802.3bm 100GBASE-SR4, CE, QSFP28 MSA, SFF-8636, SFF-8665

# Product Documentation
Multi-Vendor MSA Compatible 100G-QSFP28-100 QSFP Datasheet

Avago Compatible AFBR-89CTDZ QSFP28 Module is based on our product 100G-QSFP28-100. When You will order it will be encoded with Avago code and it will be labeled with part number: 100G-QSFP28-100-AG, where AG means Avago Compatible. Above You can download data-sheet of our 100G-QSFP28-100 product.

# Product Description

Our Compatible Avago AFBR-89CTDZ QSFP28 transceiver is based on our 100G-QSFP28-100 product, which has the same parameters and is manufactured in accordance with the same industry standards as its OEM counterpart. Our compatible module version is designed for operation over a Double Fiber Multi-Mode Fiber (MMF) optical cable. It has a minimum guaranteed optical budget of 1.9 dB, which typically is enough to reach about 100 meters over OM3 type fiber or 150 meters using higher category MMF fiber such as OM4 or OM5. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum (guaranteed) optical budget and the average attenuation of optical cabling in the industry. Our Avago AFBR-89CTDZ compatible transceiver uses a high-quality VSCEL Laser transmitter operating at 850 nm nominal wavelength and a 850 nm PIN Photodiode receiver. This module supports DDM/DOM optical diagnostics and provides diagnostic data about the current operating conditions. This compatible module has a MTP/MPO connector and module is designed for operation in standard temperature networking environments ranging from 0°-70°C. The transceiver chipset supports data rates ranging from 103.125 Gbps and such applications as 100G Ethernet (103.125 Gbps). It is important to note that the mentioned application support will vary depending on the port where the module will be used, and it supported applications as well as module speed configuration during ordering process, but we can ensure that our module will support at least the same functionality as its OEM counterpart. This is a multi-purpose transceiver that can be used in a variety of different places in today’s networking. As a result, Internet Service Provider (ISP) Aggregation and Backbone, Mobile Operator Core Networks and Data Center Core Network interconnections are the most popular applications for this product.

Our compatible Avago AFBR-89CTDZ module is CE/RoHS certified, it meets product safety standards, and is compliant with QSFP28 Multi Source Agreement (MSA) SFF-8665 industry standard. To ensure smooth operation, we have completed compatibility tests for this module with the most recent platforms of Avago networking equipment, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly in Avago platforms. We are committed to quality, therefore before delivering our products, we conduct stringent quality inspections that include optical parameter measurements, connector cleanliness tests, and EEPROM memory data validation tests. If you have any questions, please Contact us. We will gladly learn about your needs and recommend the best compatible products from our portfolio.

preloader