Standard recommended retail price without VAT.
€97.60
Standard recommended retail price without VAT.
Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:
Media Type: | Multi-Mode Fiber (MMF) |
---|---|
Connectors: | MTP/MPO-12 |
Supported Data Rate: | 212.5 Gbps |
Supported Applications: | 200G Ethernet (212.5 Gbps) |
Modulation | PAM4 (Pulse Amplitude Modulation 4-level) |
DDM/DOM: | Supported |
CDR (Clock and Data Recovery) chip | Supported |
Forward Error Correction (FEC): | Host FEC Supported |
Minimum Optical Budget: | 1.9 dB |
Maximum Distance: | 100 m (OM4) / 70 m (OM3) |
Transmitter Type: | 4xVCSEL |
TX Wavelength: | 4×850 nm |
Tx Wavelength Bandwidth: | 20 nm (840-860 nm) |
Receiver Type: | 4xPIN |
RX Wavelength: | 4×850 nm |
Rx Wavelength Bandwidth: | 20 nm (840-860 nm) |
Average Launch Power (Min) Each Lane: | -6.5 dBm |
Average Launch Power (Max) Each Lane: | 4 dBm |
Extinction Ratio (Min): | 3 dB |
Average Receiver Sensitivity (Min) Each Lane: | -8.4 dBm |
Average Receiver Sensitivity (Max) Each Lane: | 4 dBm |
Receiver Overload: | +4dBm |
Temperature Range: | Standard 0°-70°C |
Storage Temperature: | -40° to 85°C |
Relative Humidity: | 0 to 85% |
Power Consumption: | ≤5W |
Power: | +3.3V |
Compliance: | 200GAUI-4, CMIS V4.0, IEEE 802.3bs, IEEE 802.3cd, QSFP-DD MSA, RoHS-6, SFF-8679, CE |
II-VI / Finisar Compatible FTCC8612E1PCM is based on our product 200G-QSFP56-100 When You will order it will be encoded to be compatible with II-VI / Finisar equipment and it will be labeled with part number: 200G-QSFP56-100-FI, where FI means II-VI / Finisar Compatible. Above You can download the datasheet of our 200G-QSFP56-100.
Our Compatible II-VI / Finisar FTCC8612E1PCM QSFP56 transceiver is based on our 200G-QSFP56-100 product, which has the same parameters and is manufactured in accordance with the same industry standards as its OEM counterpart. Our compatible module version is designed for operation over a Double Fiber Multi-Mode Fiber (MMF) optical cable. It has a minimum guaranteed optical budget of 1.9 dB, which typically is enough to reach about 100 meters over OM4 or higher MMF category fiber. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum (guaranteed) optical budget and the average attenuation of optical cabling in the industry. Our II-VI / Finisar FTCC8612E1PCM compatible transceiver uses a high-quality VSCEL Laser transmitter operating at 850 nm nominal wavelength and a 850 nm PIN Photodiode receiver. This module supports DDM/DOM optical diagnostics and provides diagnostic data about the current operating conditions. This compatible module has a MTP/MPO-12 connector and module is designed for operation in standard temperature networking environments ranging from 0°-70°C. The transceiver chipset supports data rates ranging from 212.5 Gbps (4 x 53.125 Gbps) and such applications as 200G Ethernet (212.5 Gbps). It is important to note that the mentioned application support will vary depending on the port where the module will be used, and it supported applications as well as module speed configuration during ordering process, but we can ensure that our module will support at least the same functionality as its OEM counterpart. This is a multi-purpose transceiver that can be used in a variety of different places in today’s networking. As a result, Internet Service Provider (ISP) Multi-Rate communication links, primarily SDH (SONET), and other optical links are the most popular applications for this product.
Our compatible II-VI / Finisar FTCC8612E1PCM module is CE/RoHS certified, it meets product safety standards, and is compliant with physical layer specifications of 200GAUI-4 electrical interface and transmitting IEEE 802.3bs industry standard. To ensure smooth operation, we have completed compatibility tests for this module with the most recent platforms of II-VI / Finisar networking equipment, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly in II-VI / Finisar platforms. We are committed to quality, therefore before delivering our products, we conduct stringent quality inspections that include optical parameter measurements, connector cleanliness tests, and EEPROM memory data validation tests. If you have any questions, please Contact us. We will gladly learn about your needs and recommend the best compatible products from our portfolio.