LMQ8611-PC+

Hisense LMQ8611-PC+ Compatible 200G 100M MMF QSFP56 Transceiver

# Key Highlights
  • Type: 200G-SR4 QSFP56
  • Compatibility: Hisense Broadband Compatible
  • Tx/Rx Wavelength: 4x850nm/4x850nm
  • Laser: VSCEL
  • Modulation: PAM4
  • Fiber Type: Multi-Mode Fiber (MMF)
  • Connectors: MTP/MPO-12
  • Optical Budget: 1.9dB
  • Max. Distance: 100 m (OM4) / 70 m (OM3)
  • Data Rate: 212.5 Gbps (4 x 53.125 Gbps)
  • DDM/DOM: Supported
  • FEC Forward Error Correction: Supported
  • Power Consumption: ≤ 5W
  • Temperature: Standard 0° – 70°C
# Pricing & Ordering
SKU: 200G-QSFP56-100-MS

97.60

Standard recommended retail price without VAT.

Lead Time: Below 1 Week in EU Countries
# Quality Assurance

Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:

# Key Technical Data
Media Type:

Multi-Mode Fiber (MMF)

Connectors:

MTP/MPO-12

Supported Data Rate:

212.5 Gbps

Supported Applications:

200G Ethernet (212.5 Gbps)

Modulation

PAM4 (Pulse Amplitude Modulation 4-level)

DDM/DOM:

Supported

CDR (Clock and Data Recovery) chip

Supported

Forward Error Correction (FEC):

Host FEC Supported

Minimum Optical Budget:

1.9 dB

Maximum Distance:

100 m (OM4) / 70 m (OM3)

Transmitter Type:

4xVCSEL

TX Wavelength:

4×850 nm

Tx Wavelength Bandwidth:

20 nm (840-860 nm)

Receiver Type:

4xPIN

RX Wavelength:

4×850 nm

Rx Wavelength Bandwidth:

20 nm (840-860 nm)

Average Launch Power (Min) Each Lane:

-6.5 dBm

Average Launch Power (Max) Each Lane:

4 dBm

Extinction Ratio (Min):

3 dB

Average Receiver Sensitivity (Min) Each Lane:

-8.4 dBm

Average Receiver Sensitivity (Max) Each Lane:

4 dBm

Receiver Overload:

+4dBm

Temperature Range:

Standard 0°-70°C

Storage Temperature:

-40° to 85°C

Relative Humidity:

0 to 85%

Power Consumption:

≤5W

Power:

+3.3V

Compliance:

200GAUI-4, CMIS V4.0, IEEE 802.3bs, IEEE 802.3cd, QSFP-DD MSA, RoHS-6, SFF-8679, CE

# Product Documentation
200G-QSFP56-100 Datasheet

Hisense Broadband Compatible LMQ8611-PC+ is based on our product 200G-QSFP56-100 When You will order it will be encoded to be compatible with Hisense Broadband equipment and it will be labeled with part number: 200G-QSFP56-100-MS, where MS means Hisense Broadband Compatible. Above You can download the datasheet of our 200G-QSFP56-100.

# Product Description

Our Compatible Hisense Broadband LMQ8611-PC+ QSFP56 transceiver is based on our 200G-QSFP56-100 product, which has the same parameters and is manufactured in accordance with the same industry standards as its OEM counterpart. Our compatible module version is designed for operation over a Double Fiber Multi-Mode Fiber (MMF) optical cable. It has a minimum guaranteed optical budget of 1.9 dB, which typically is enough to reach about 100 meters over OM4 or higher MMF category fiber. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum (guaranteed) optical budget and the average attenuation of optical cabling in the industry. Our Hisense Broadband LMQ8611-PC+ compatible transceiver uses a high-quality VSCEL Laser transmitter operating at 850 nm nominal wavelength and a 850 nm PIN Photodiode receiver. This module supports DDM/DOM optical diagnostics and provides diagnostic data about the current operating conditions. This compatible module has a MTP/MPO-12 connector and module is designed for operation in standard temperature networking environments ranging from 0°-70°C. The transceiver chipset supports data rates ranging from 212.5 Gbps (4 x 53.125 Gbps) and such applications as 200G Ethernet (212.5 Gbps). It is important to note that the mentioned application support will vary depending on the port where the module will be used, and it supported applications as well as module speed configuration during ordering process, but we can ensure that our module will support at least the same functionality as its OEM counterpart. This is a multi-purpose transceiver that can be used in a variety of different places in today’s networking. As a result, Internet Service Provider (ISP) Multi-Rate communication links, primarily SDH (SONET), and other optical links are the most popular applications for this product.

Our compatible Hisense Broadband LMQ8611-PC+ module is CE/RoHS certified, it meets product safety standards, and is compliant with physical layer specifications of 200GAUI-4 electrical interface and transmitting IEEE 802.3bs industry standard. To ensure smooth operation, we have completed compatibility tests for this module with the most recent platforms of Hisense Broadband networking equipment, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly in Hisense Broadband platforms. We are committed to quality, therefore before delivering our products, we conduct stringent quality inspections that include optical parameter measurements, connector cleanliness tests, and EEPROM memory data validation tests. If you have any questions, please Contact us. We will gladly learn about your needs and recommend the best compatible products from our portfolio.