Standard recommended retail price without VAT.
CXP-100GBASE-SR10
Juniper CXP-100GBASE-SR10 (740-046563) Compatible CFP Module
# Key Highlights
- Type: CFP-100GBASE-SR10 CFP
- Compatibility: Juniper Compatible
- Tx/Rx Wavelength: 850 nm. / 850 nm.
- Laser: VSCEL Laser
- Fiber Type: Multi-Mode Fiber (MMF)
- Connectors: MTP/MPO
- Optical Budget: 1.9dB
- Max. Distance: 150m(OM4), 100m(OM3)
- Data Rate: 103.125-111.81 Gbps
- DDM/DOM: Supported
- Power Consumption: ≤ 7W
- Temperature: Standard 0° – 70°C
# Pricing & Ordering
SKU: 100G-CFP-150-JU
€1,276.28
Lead Time: Below 1 Week in EU Countries
# Quality Assurance
Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:
# Key Technical Data
| Media Type: | 10 Paralel Lanes of Double Multi-Mode Fiber (MMF.) |
|---|---|
| Connectors: | MTP/MPO |
| TX Wavelength: | 850 nm. |
| RX Wavelength: | 850 nm. |
| Minimum Optical Budget: | 1.9 dB |
| Maximum Distance: | 150m |
| Supported Data Rate: | 103.125-111.81 Gbps |
| Supported Applications: | 100G Ethernet (103.125Gbps), OTU4 4l1-9D1F (112 Gbps) |
| DDM/DOM: | Supported |
| CDR (Clock and Data Recovery) chip | Supported |
| Transmitter Type: | VSCEL Laser |
| Tx Wavelength Bandwidth: | 20 nm (840-860 nm) |
| Transmit Power Per Lane (Min): | -7.6dBm |
| Receiver Type: | PIN |
| Rx Wavelength Bandwidth: | 20 nm (840-860 nm) |
| Average Receiver Sensitivity (Min) Each Lane: | -9.5 dBm |
| Receiver Overload: | Each Lane 3.4 dB |
| Temperature Range: | Standard 0°-70°C |
| Storage Temperature: | -40° to 85°C |
| Relative Humidity: | 0 to 85% |
| Power Consumption: | ≤7.0W |
| Power: | +3.3V |
| Chipset: | MAXIM, MINDSPEED, SEMTECH, Sumitomo |
| Compliance: | CFP MSA, IEC60825-1 Laser Safety Compliant, IEEE 802.3ba 100GBASE-SR10, SFF-8419, CE, RoHS, SFF-8636 |
# Product Documentation
Multi-Vendor MSA Compatible 100G-CFP-150 CFP Datasheet
Juniper Compatible CFP-100GBASE-SR10 CFP Module is based on our product 100G-CFP-150. When You will order it will be encoded to be compatible with Juniper equipment and it will be labeled with part number: 100G-CFP-150-JU, where JU means Juniper Compatible. Above You can download data-sheet of our 100G-CFP-150 product.
# Product Description
CXP-100GBASE-SR10 (740-046563) is Juniper Compatible 100GBASE-SR10 CFP (Centum Form Factor Pluggable) Transceiver, operating over pair of multi-mode optical fiber with 10 independent optical communication lanes with speed of 10.3125Gbps (Ethernet application) or 11.181Gbps (OTU4 application). CXP-100GBASE-SR10 (740-046563) compatible transceiver has minimum guaranteed optical budget of 1.9 dB, which in most cases is enough to reach reach 150 m over OM4 multi-mode fiber, or 100 m over OM3 multi-mode fiber. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. Compatible CXP-100GBASE-SR10 (740-046563) uses 10 x VCSEL (Vertical Cavity Surface Emitting Laser) transmitters operating at nominal wavelength 850 nm and 10 x 850 nm PIN Photodiode receivers. Compatible CXP-100GBASE-SR10 module converts 10 parallel electrical data inputs to 10 parallel optical data output signals and also converts 10 parallel optical signals into 10 parallel electrical signals through an array of PIN photodiodes and associated circuit. Module support DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. Compatible CXP-100GBASE-SR10 module requires Single 3.3V Power Supply and has less then 7W power consumption. Module operates in Standard 0°-70°C temperature range, and has MTP/MPO connector.
CXP-100GBASE-SR10 (740-046563) Juniper compatible Transceiver is based on our 100G-CFP-150 product, which is fully compliant with CFP Multi Source Agreement (MSA) and IEEE 802.3ba 100GBASE-SR10 standards, product safety standards and is CE/RoHS certified. We perform compatibility tests for CXP-100GBASE-SR10 (740-046563) Juniper compatible Transceiver with the most recent Juniper networking equipment platforms, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly with Juniper platforms! Because we are committed to providing high-quality service, we conduct rigorous quality checks before delivering our products. As a result, we perform optical parameter measurements, connector cleanness tests, and EEPROM memory data validation tests on our products. Feel free to Contact us – We will gladly learn about your needs and provide you with the best alternative of CXP-100GBASE-SR10!
