MGBIC-BX120-U

MGBIC-BX120-U Extreme Networks compatible 1G BX – BiDi SFP 120km TX 1490nm Module

# Key Highlights
  • Type: SFP
  • Compatibility: Extreme Networks compatible
  • Tx/Rx Wavelength: 1490 nm. / 1550 nm.
  • Media Type: Single-Mode Fiber (SMF)
  • Optical Budget: 22 dB
  • Max. Distance: 80 km
  • Data Rate: 1.063-1.25Gbps
  • Temperature:Industrial -45°C – +85°C
# Pricing & Ordering
SKU: BIDI-1.25G-SFP-80-ADI-EX

18.77

Standard recommended retail price without VAT.

Lead Time: Below 1 Week in EU Countries
# Quality Assurance

Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:

# Key Technical Data
Media Type:

Single-Mode Fiber (SMF)

TX Wavelength:

1490 nm.

RX Wavelength:

1550 nm.

Minimum Optical Budget:

22 dB

Maximum Distance:

80km

Supported Data Rate:

1.063-1.25Gbps

Supported Applications:

Gigabit Ethernet (1.25 Gbps), 1G Fiber Channel (1.0625 Gbps)

DDM/DOM:

Support

Temperature Range:

Industrial -45°C – +85°C

Connectors:

Single LC

Tx Wavelength Bandwidth:

40 nm (1470-1510 nm)

Rx Wavelength Bandwidth:

40 nm (1530-1570 nm)

Minimum Transmitting Power:

-2 dB

Maximum Transmitting Power:

3 dB

Receiver Sensitivity:

-24 dBm

Receiver Overload:

-3 dBm

Dispersion:

600-800 ps/nm

Transmitter Type:

DFB Laser

Receiver Type:

PIN photodiode

Power:

+3.3V single power supply

Chipset:

MAXIM, MINDSPEED, SEMTECH

Compliance:

CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, INF-8074i, RoHS, SFP MSA

Transceiver Type:

SFP

# Product Documentation
Multi-Vendor MSA Compatible BIDI-1.25G-SFP-80-ADI SFP Datasheet

Extreme Networks Compatible MGBIC-BX120-U SFP Module is based on our product BIDI-1.25G-SFP-80-ADI. When You will order it will be encoded to be compatible with Extreme Networks equipment and it will be labeled with part number: BIDI-1.25G-SFP-80-ADI-EX, where EX means Extreme Networks Compatible. Above You can download datasheet of our BIDI-1.25G-SFP-80-ADI product.

# Product Description

    Compatible Extreme Networks MGBIC-BX120-U is Multi-Vendor MSA Compatible SFP (Small Form factor Pluggable) Transceiver, operating over Single Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 22 dB, with in most cases is enough to reach about 80 km distance. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This transceiver use top quality DFB Laser transmitter with operating at nominal wavelength 1490 nm. and 1550 nm. PIN Photodiode receiver. It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. Extreme Networks MGBIC-BX120-U operates in Industrial -45°C – +85°C temperature range and has Single LC interface. SFP support 1.063-1.25Gbps data rate and such applications as Gigabit Ethernet (1.25 Gbps)|1G Fiber Channel (1.0625 Gbps). Compatible Extreme Networks MGBIC-BX120-U SFP Single Fiber optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular applications are Gigabit Ethernet communication links in extreme industrial environment, Enterprise LAN & SAN Networks with high or low environment temperature demand, Data Center LAN & SAN Networks and other optical links.

    Transceiver is CE/RoHS certified and it is Compliant with product safety standards. Extreme Networks MGBIC-BX120-U SFP Transceiver is fully compliant to SFP Multi Source Agreement INF-8074i. Consequently, it means that module is compatible with 80% of networking equipment, where is not implemented a special algorithm for protection against third party modules. However – we can provide SFP transceiver with custom-encoded firmware in order to make it work almost in any equipment. Therefore, we will be glad to know what your requirement is. Because our focus is providing top quality service, we are performing serious quality checks before delivery of our products. As a result, we do optical parameter measurements, connector cleanness tests and SFP transceiver EEPROM memory data validation tests. We will be glad to know your requirements – Contact us.