BIDI-2.67G-SFP-80-ADS

Multi-Vendor MSA Compatible BIDI-2.67G-SFP-80-ADS SFP Module

# Key Highlights
  • Type:SFP
  • Compatibility:Multi-Vendor MSA Compatible
  • Tx/Rx Wavelength: 1490 nm. / 1550 nm.
  • Media Type: Single-Mode Fiber (SMF)
  • Optical Budget: 28 dB
  • Max. Distance: 80 km
  • Data Rate: 100-2.67Gbps
  • Temperature:Standard 0°-70°C
# Pricing & Ordering
SKU: BIDI-2.67G-SFP-80-ADS

30.33

Standard recommended retail price without VAT.

Lead Time: Below 1 Week in EU Countries
# Quality Assurance

Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:

# Key Technical Data
Media Type:

Single-Mode Fiber (SMF)

TX Wavelength:

1490 nm.

RX Wavelength:

1550 nm.

Minimum Optical Budget:

28 dB

Maximum Distance:

80km

Supported Data Rate:

100-2.67Gbps

Supported Applications:

Gigabit Ethernet (1.25 Gbps), 100M Ethernet (100Mbps), 2G Fiber Channel (2.125 Gbps), 1G Fiber Channel (1.0625 Gbps), STM-1 (155Mbps), STM-4 (622Mbps), STM-16 (2.488 Gbps), ODU0 (1.244Gbps), ODU1 (2.498Gbps), OTU1 (2.66Gbps), CPRI option 1 (614.4 Mbps), CPRI option 2 (1228.8 Mbps), CPRI option 3 (2.458 Gbps), OBSAI RP3 x 1 (768 Mbps), OBSAI RP3 x 2 (1.536 Gbps)

DDM/DOM:

Support

Temperature Range:

Standard 0°-70°C

Connectors:

Single SC

Tx Wavelength Bandwidth:

40 nm (1470-1510 nm)

Rx Wavelength Bandwidth:

40 nm (1530-1570 nm)

Minimum Transmitting Power:

0 dB

Maximum Transmitting Power:

5 dB

Receiver Sensitivity:

-28 dBm

Receiver Overload:

-7 dBm

Dispersion:

1600 ps/nm

Transmitter Type:

DFB Laser

Receiver Type:

PIN photodiode

Power:

+3.3V single power supply

Chipset:

MAXIM, MINDSPEED, SEMTECH

Compliance:

CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, INF-8074i, RoHS, SFP MSA

# Product Documentation
# Product Description

    BIDI-2.67G-SFP-80-ADS is Multi-Vendor MSA Compatible SFP (Small Form factor Pluggable) Transceiver, operating over Single Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 28 dB, with in most cases is enough to reach about 80 km distance. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This transceiver use top quality DFB Laser transmitter with operating at nominal wavelength 1490 nm. and 1550 nm. PIN Photodiode receiver. It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. BIDI-2.67G-SFP-80-ADS operates in Standard 0°-70°C temperature range and has Single SC interface. SFP support 100-2.67Gbps data rate and such applications as STM-16 (2.488 Gbps)|STM-4 (622Mbps)|STM-1 (155Mbps)|100M Ethernet (100Mbps)|Gigabit Ethernet (1.25 Gbps)|1G Fiber Channel (1.0625 Gbps)|2G Fiber Channel (2.125 Gbps)|OTU1 (2.66Gbps)|ODU0 (1.244Gbps)|ODU1 (2.498Gbps)|CPRI option 3 (2.458 Gbps)|CPRI option 2 (1228.8 Mbps)|CPRI option 1 (614.4 Mbps)|OBSAI RP3 x 2 (1.536 Gbps)|OBSAI RP3 x 1 (768 Mbps). BIDI-2.67G-SFP-80-ADS SFP Single Fiber optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular applications are SDH/SONET Links of Backbone, LTE 4G RRU and BBU Interconnections in C-RAN Frounthaul, Different Ethernet and Fiber Channel SAN Links in Enterprise Networks and other optical links.

    Transceiver is CE/RoHS certified and it is Compliant with product safety standards. BIDI-2.67G-SFP-80-ADS SFP Transceiver is fully compliant to SFP Multi Source Agreement INF-8074i. Consequently, it means that module is compatible with 80% of networking equipment, where is not implemented a special algorithm for protection against third party modules. However – we can provide SFP transceiver with custom-encoded firmware in order to make it work almost in any equipment. Therefore, we will be glad to know what your requirement is. Because our focus is providing top quality service, we are performing serious quality checks before delivery of our products. As a result, we do optical parameter measurements, connector cleanness tests and SFP transceiver EEPROM memory data validation tests.